GSE - Hygrostat for Humidifiers and Dehumidifiers, 10 A
CHF 139.00
Available, delivery time: 1-3 Werktage
Loading pickup options …
Pickup options could not be loaded.
Product information "GSE - Hygrostat for Humidifiers and Dehumidifiers, 10 A"
The GSE hygrostat switches a connected humidifier or dehumidifier according to the measured humidity. Use the two dials to set the humidity setpoint and hysteresis.
Hysteresis determines the range around the setpoint within which the unit switches and whether it operates in humidification or dehumidification mode. The external sensor with 4 m cable can be placed in the room independently of the plug-in controller.
Features
- Application: Control of a humidifier or dehumidifier
- Humidity setpoint: 30–100% relative humidity
- Dehumidification hysteresis: −10 to −1 percentage points
- Humidification hysteresis: +1 to +10 percentage points
- Maximum current: 10 A. Observe the permissible connected load.
- Mains voltage: 230 V, 50 Hz
- Sensor cable: 4 m
- Measurement accuracy: ±4.5% relative humidity
- Device dimensions (W × H × D): 160 × 100 × 90 mm
- IP rating: IP54
Directions
- Connect the controller between the socket and a suitable humidifier or dehumidifier.
- Place the sensor away from direct mist or air discharge.
- Set the setpoint and hysteresis to suit the type of device. Check the current draw and starting current of the connected device.
Package Contents
1 × GSE 10 A hygrostat with humidity sensor and 4 m sensor cable. No humidifier or dehumidifier included.
Login