Miscellaneous accessories
Ventilation accessories: seal connections and maintain the system
Is your extraction system planned but still missing a suitable fixing between the fan and duct? Or does the pre-filter sleeve need replacing? This category contains parts for those jobs. Choose according to the specific connection or the equipment you already own.
Fixing and sealing serve different purposes
A duct clamp holds the duct on its connection. The offered adjustment ranges are 60–325 mm and 65–215 mm. The diameter of the assembled joint must fall within that range. Aluminium tape seals suitable ventilation joints; it does not replace the load-bearing support for a fan or filter. A roll is useful for several joints, while a short section may suit a single job. Work out the required length from the circumference and allow for overlap.
Match the pre-filter to the filter model
The CAN-Lite sleeves are specified for the 300, 425 or 600 m³/h models. Use the exact filter designation rather than duct diameter alone. A dirty sleeve increases airflow resistance. Replacing it renews the pre-filter, not the activated carbon inside.
Choose cables by function
RJ45 cables connect compatible controllers and fans; mains connection cables serve a different purpose. The offered 3 m power cable has ferrules and is not a ready-made socket extension lead. For control cables, check device compatibility as well as length.
New arrivals
Content: 10 Mililiter (CHF 2.20 / 1 Mililiter)
Content: 100 Stück (CHF 0.06 / 1 Stück)
Content: 10 Mililiter (CHF 4.40 / 1 Mililiter)
Content: 100 Stück (CHF 0.05 / 1 Stück)
Aluminium Adhesive Tape - 50cm for 100 to 160cm Ventilation Duct
Aluminium adhesive tape for ventilation systems, for example for securing an activated carbon filter to a fan. Suitable for fans with a diameter of 100 to 160 cm.PropertiesWidth: 50 mmLength: 50 cmScope of delivery1 × Aluminium Adhesive Tape - 50cm for 100 to 160cm Ventilation Duct
Content: 50 Meter (CHF 0.03 / 1 Meter)
Aluminium Adhesive Tape - 99cm for 160 to 315cm Ventilation Duct
Aluminium adhesive tape for ventilation systems, for example for securing an activated carbon filter to a fan. Suitable for fans with a diameter of 160 to 315 cm.PropertiesWidth: 50 mmLength: 99 cmScope of delivery1 × Aluminium Adhesive Tape - 99cm for 160 to 315cm Ventilation Duct
Aluminium-Klebeband - 50 Meter
Aluminium-Klebeband. Für Lüftungen. Z.b. um den Aktivkohlefilter an den Lüfter zu kleben.Eigenschaften:Breite: 50mm Länge: 50m
Content: 50 Meter (CHF 0.40 / 1 Meter)
Anschlusskabel Strom TD 3x 1mm T12 3m
Stromkabel mit Schweizer Stecker und Aderendhülsen. Eigenschaften:Querschnitt 1mm2 Länge 3m Schwarz
Black Cable Ties - 2.8 × 200 mm, 100 pcs.
The black plastic cable ties are suitable for bundling and securing cables, wires and hoses. The internal serration of the tie ensures a secure hold. FeaturesPack size: 100 piecesWidth: 2.8 mmLength: 200 mmUV-resistantColour: Black Package contents:1 × pack of black cable ties, 2.8 × 200 mm, 100 pieces
Content: 100 Stück (CHF 0.06 / 1 Stück)
Bride 60-325mm
Einstellbare Bride (Ringschelle) zur Befestigung von Lüftungsschläuchen. Einstellbar von 6cm bis 32.5cm Stahl verzinkt Rostfrei
Ersatz-Vorfiltervlies zu CAN-Lite 300m³/h.
Wenn das Vorfiltervlies am Aktivkohlefilter zu stark verschmutz ist, wird die Leistung des Ventilators stark reduziert. Falls der Aktivkohlefilter über längere Zeit mit einem stark verschmutzen Vorfiltervliess betrieben wird, kann der Ventilator dadurch beschädigt werden.
Ersatz-Vorfiltervlies zu CAN-Lite 425m³/h.
Wenn das Vorfiltervlies am Aktivkohlefilter zu stark verschmutz ist, wird die Leistung des Ventilators stark reduziert. Falls der Aktivkohlefilter über längere Zeit mit einem stark verschmutzen Vorfiltervliess betrieben wird, kann der Ventilator dadurch beschädigt werden.
Ersatz-Vorfiltervlies zu CAN-Lite 600m³/h.
Wenn das Vorfiltervlies am Aktivkohlefilter zu stark verschmutz ist, wird die Leistung des Ventilators stark reduziert. Falls der Aktivkohlefilter über längere Zeit mit einem stark verschmutzen Vorfiltervliess betrieben wird, kann der Ventilator dadurch beschädigt werden.
Filtereinsatz zu Vorfilterkasten - 100 bis 250mm
Filtereinsatz zu Vorfilterkasten EU-5 RLV-100 bis 250. Zur pollensicheren Filtrierung der Zuluft.
Hose clamp 65-215mm
Adjustable clamp (ring clamp) for fastening ventilation hoses.Adjustable from 6.5cm to 21.5cmGalvanised steelRust-resistant
LAN Cable - 10 m, RJ45
Blue LAN cable with RJ45 connectors and a length of 10 m.Properties:Length: 10 mColour: BlueConnectors: 2 × RJ45 plugsScope of delivery:1 × LAN cable, 10 m, blue
Content: 10 Meter (CHF 1.49 / 1 Meter)
LAN Cable - 2 m, RJ45
LAN cable with RJ45 connectors and a length of 2 m.Properties:Length: 2 mConnectors: 2 × RJ45 plugsScope of delivery:1 × LAN cable, 2 m
Content: 2 Meter (CHF 2.45 / 1 Meter)
LAN Cable - 5 m, RJ45
Blue LAN cable with RJ45 connectors and a length of 5 m.Properties:Length: 5 mColour: BlueConnectors: 2 × RJ45 plugsScope of delivery:1 × LAN cable, 5 m, blue
Content: 5 Meter (CHF 1.98 / 1 Meter)
LAN Cable Splitter - RJ45
RJ45 Y-adapter for splitting a network connection. The compact LAN cable splitter is suitable for network cabling at home or in the office and helps keep cable routing tidy.Properties:Connector type: RJ45Design: Y-adapter / splitterApplication: Home and office network cablingMaterial: Designed for everyday useNote: A passive RJ45 splitter does not replace an active network switch. Whether multiple devices can be used independently and simultaneously depends on the existing cabling and network components.Scope of delivery:1 × LAN cable splitter / RJ45 Y-adapter
ONA – Odour Control Duct Rohrstück, 100 mm
Der ONA Odour Control Duct ist ein Rohrstück zur Aufnahme eines ONA Blocks in einer Lüftungsleitung. Über die Wartungsklappe lässt sich der Block einsetzen und bei Bedarf austauschen, ohne die Rohrverbindung vollständig zu lösen. Diese Ausführung passt zu Lüftungsleitungen mit 100 mm Durchmesser.EigenschaftenMarke: ONAModell: Odour Control DuctProdukttyp: Rohrstück für ONA BlockAnschlussdurchmesser: 100 mmAusstattung: Wartungsklappe zum Einsetzen und Wechseln des BlocksLieferumfang1 × ONA – Odour Control Duct Rohrstück, 100 mm
Ona Odour Control Duct - 125mm
The ONA Odour Control Duct makes it easy to integrate an ONA Block into an existing ventilation system with minimal effort. ONA Blocks neutralise unpleasant odours and provide a pleasant freshness.Application is simple. Install the ONA Control Duct in the existing ventilation system once. Then simply open the maintenance hatch and insert the ONA Block.Properties:Duct diameter: 125 mmPackage contents:Product: 1 × ONA Odour Control Duct (125 mm)
Panzertape Klebeband
Panzertape-Klebeband. Für alle Sachen, die wirklich gut halten müssen.Eigenschaften:Breite: 50mm Länge: 50m
Content: 50 Meter (CHF 0.40 / 1 Meter)
Nothing found? Our tips for you...
Content: 100 Stück (CHF 0.03 / 1 Stück)
Content: 100 Stück (CHF 0.11 / 1 Stück)
