Grow boxes
Grow tents: footprint, height and access matter
A grow tent provides a dedicated space for your plants. To fit your room, its width, depth and height all matter. Measure the area in front of the door too: you should be able to reach pots, adjust lighting and remove accessories without rearranging the entire setup each time.
A model number is not a complete measurement
For Mammoth Pro+, «120» denotes a 120 × 120 × 200 cm tent, while «120L» measures 120 × 60 × 160 cm. The first number is the same, but the space required is quite different. For a low or narrow location, check the full dimensions. The Secret Jardin range also includes the Lodge, with separate areas for different plant stages.
Plan the tent, equipment and accessories separately
An individual grow tent is not an equipped set. Check door positions, duct openings, cable ports and the permitted load before choosing lighting and ventilation. Collection trays and plant-support nets need to fit the interior dimensions. If you want several components together, also compare the grow tent sets and their detailed equipment tables.
Subcategories
Garland - Ebb and flow tray, 60x60x7 cm
The Garland tray has a 60×60 cm footprint and can serve as a catch tray, a work surface when handling plants or a base for ebb and flow systems. Its four enclosed sides keep water and dirt inside.The black rigid plastic and side walls about 7 cm high make the tray a reusable base for growing and work areas.FeaturesBrand: GarlandDimensions: 60×60×7 cmMaterial: Rigid plasticColour: BlackSide walls: Enclosed on all four sides, approx. 7 cm highUse: Catch tray, work surface and base for ebb and flow systemsPack
Mammoth - Classic+ 100 Grow Tent, 100x100x200 cm
The Mammoth Classic+ 100 is a grow tent with external dimensions of 100 × 100 × 200 cm. The highly reflective 600D Mylar cover and 19 mm diameter steel frame form the basis of an enclosed indoor growing area. Reinforced plastic corners and sturdy zips complete the construction. The wide front door makes it easy to reach the plants. Separate intake and exhaust openings and cable ports let you install the equipment needed. Features Model: Classic+ 100 Dimensions: 100 × 100 × 200 cm Tent material: Highly refl
Mammoth - Classic+ 120 Grow Tent, 120x120x200 cm
The Mammoth Classic+ 120 is a grow tent with external dimensions of 120 × 120 × 200 cm. The highly reflective 600D Mylar cover and 19 mm diameter steel frame form the basis of an enclosed indoor growing area. Reinforced plastic corners and sturdy zips complete the construction. The wide front door makes it easy to reach the plants. Separate intake and exhaust openings and cable ports let you install the equipment needed. Features Model: Classic+ 120 Dimensions: 120 × 120 × 200 cm Tent material: Highly refl
Mammoth - Classic+ 150 Grow Tent, 150x150x200 cm
The Mammoth Classic+ 150 is a grow tent with external dimensions of 150 × 150 × 200 cm. The highly reflective 600D Mylar cover and 19 mm diameter steel frame form the basis of an enclosed indoor growing area. Reinforced plastic corners and sturdy zips complete the construction. The wide front door makes it easy to reach the plants. Separate intake and exhaust openings and cable ports let you install the equipment needed. Features Model: Classic+ 150 Dimensions: 150 × 150 × 200 cm Tent material: Highly refl
Mammoth - Classic+ 240L Grow Tent, 240x120x200 cm
The Mammoth Classic+ 240L is a grow tent with external dimensions of 240 × 120 × 200 cm. The highly reflective 600D Mylar cover and 19 mm diameter steel frame form the basis of an enclosed indoor growing area. Reinforced plastic corners and sturdy zips complete the construction. Two front doors, two rear doors and one side door make access easier from several directions. Separate intake and exhaust openings and cable ports let you install the equipment needed. Features Model: Classic+ 240L Dimensions: 240
Mammoth - Classic+ 80 Grow Tent, 80x80x180 cm
The Mammoth Classic+ 80 is a grow tent with external dimensions of 80 × 80 × 180 cm. The highly reflective 600D Mylar cover and 19 mm diameter steel frame form the basis of an enclosed indoor growing area. Reinforced plastic corners and sturdy zips complete the construction. The wide front door makes it easy to reach the plants. Separate intake and exhaust openings and cable ports let you install the equipment needed. Features Model: Classic+ 80 Dimensions: 80 × 80 × 180 cm Tent material: Highly reflective
Mammoth - Lite+ 100 Grow Tent, 100 × 100 × 180 cm
The Mammoth Lite+ 100 is a grow tent measuring 100 × 100 × 180 cm. The reflective lining distributes light from a separately installed grow light throughout the growing area. The frame consists of 16 mm diameter steel tubes and plastic corner connectors. The Lite+ version is easy to assemble and offers front access. The specified intake and exhaust ports make it easier to assemble a suitably sized ventilation system. Features Model: Mammoth Lite+ 100 Dimensions (W × D × H): 100 × 100 × 180 cm Frame: Steel
Mammoth - Lite+ 100 Grow Tent, 100 × 100 × 180 cm
The Mammoth Lite+ 100 is an indoor grow tent with a 100 × 100 cm footprint and a height of 180 cm. The Lite+ series combines a frame of 16 mm steel tubes with reinforced plastic corners and reflective 170D Mylar. The zipped front door provides access to the entire growing area. Separate air intake and exhaust ports make it easier to fit suitable ventilation. An additional vent and cable port let you arrange airflow and route cables. Refer to the MT-L100 dimensions and openings below when planning your setup
Mammoth - Pro+ 120 Grow Tent, 120 × 120 × 200 cm
The Mammoth Pro+ 120 is a grow tent measuring 120 × 120 × 200 cm. The reflective lining distributes light from a separately installed grow light throughout the growing area. The frame consists of 22 mm diameter steel tubes and plastic corner connectors. The Pro+ version combines 600D Mylar with a sturdy 22 mm frame. The specified intake and exhaust ports make it easier to assemble a suitably sized ventilation system. Features Model: Mammoth Pro+ 120 Dimensions (W × D × H): 120 × 120 × 200 cm Frame: Steel t
Mammoth - Pro+ 120L Grow Tent, 120 × 60 × 160 cm
The Mammoth Pro+ 120L is a grow tent measuring 120 × 60 × 160 cm. The reflective lining distributes light from a separately installed grow light throughout the growing area. The frame consists of 22 mm diameter steel tubes and plastic corner connectors. The long 120 × 60 cm footprint fits narrow spaces. The front door provides access to the growing area. Separate ports feed ventilation ducts and cables through the tent cover. Features Model: Mammoth Pro+ 120L Dimensions (W × D × H): 120 × 60 × 160 cm Frame
Mammoth - Pro+ 240 Grow Tent, 240 × 240 × 200 cm
The Mammoth Pro+ 240 is a grow tent measuring 240 × 240 × 200 cm with a floor area of 5.76 m². The 600D cover with reflective Mylar lining encloses a frame made from 22 mm steel tubes. Reinforced plastic corners connect the tubes. Two front doors, two rear doors and one side access point make it easier to work in a larger growing area. Separate ports for intake and exhaust air, Cooltubes and cables keep the installation tidy. The removable floor tray makes cleaning easier. Features Series: Mammoth Pro+ Mod
Mammoth - Pro+ 240L Grow Tent, 240 × 120 × 200 cm
The Mammoth Pro+ 240L is a grow tent measuring 240 × 120 × 200 cm. The reflective lining distributes light from a separately installed grow light throughout the growing area. The frame consists of 22 mm diameter steel tubes and plastic corner connectors. The Pro+ version combines 600D Mylar with a sturdy 22 mm frame. The specified intake and exhaust ports make it easier to assemble a suitably sized ventilation system. Features Model: Mammoth Pro+ 240L Dimensions (W × D × H): 240 × 120 × 200 cm Frame: Steel
Mammoth - Pro+ 300 Grow Tent, 300 × 300 × 200 cm
The Mammoth Pro+ 300 is a grow tent measuring 300 × 300 × 200 cm. The reflective lining distributes light from a separately installed grow light throughout the growing area. The frame consists of 22 mm diameter steel tubes and plastic corner connectors. The Pro+ version combines 600D Mylar with a sturdy 22 mm frame. The specified intake and exhaust ports make it easier to assemble a suitably sized ventilation system. Features Model: Mammoth Pro+ 300 Dimensions (W × D × H): 300 × 300 × 200 cm Frame: Steel t
Mammoth - Propagator 125 Propagation Tent, 120 × 60 × 145 cm
The Mammoth Propagator 125 is a propagation tent for cuttings and young plants on several levels. Three removable, height-adjustable shelves make use of the 120 × 60 cm footprint. You can set the spacing to suit your propagation trays and plant height. The large front door provides easy access for watering, checking and moving plants. Inside, a 190D Mylar lining reflects light. The frame consists of 16 mm metal tubes with PP polymer corners. A cable port, passive air intake and exhaust opening accommodate y
Nutriculture - Flexible Tray catch tray, 100x100x10 cm
The Nutriculture Flexible Tray has a 100×100 cm footprint and is a flexible catch tray for grow rooms and suitably sized grow tents. It can be moved through narrow openings where rigid trays are impractical.The 10 cm high side walls help keep water and dirt inside the tray. It can also be used as a base to keep work areas clean. Nutriculture manufactures it in-house.FeaturesBrand: NutricultureModel: Flexible TrayDimensions: 100×100×10 cmSide wall height: 10 cmDesign: FlexibleUse: Catch tray and base for gro
Nutriculture - Flexible Tray catch tray, 120x120x10 cm
The Nutriculture Flexible Tray has a 120×120 cm footprint and is a flexible catch tray for grow rooms and suitably sized grow tents. It can be moved through narrow openings where rigid trays are impractical.The 10 cm high side walls help keep water and dirt inside the tray. It can also be used as a base to keep work areas clean. Nutriculture manufactures it in-house.FeaturesBrand: NutricultureModel: Flexible TrayDimensions: 120×120×10 cmSide wall height: 10 cmDesign: FlexibleUse: Catch tray and base for gro
Nutriculture - Flexible Tray catch tray, 150x150x10 cm
The Nutriculture Flexible Tray has a 150×150 cm footprint and is a flexible catch tray for grow rooms and suitably sized grow tents. It can be moved through narrow openings where rigid trays are impractical.The 10 cm high side walls help keep water and dirt inside the tray. It can also be used as a base to keep work areas clean. Nutriculture manufactures it in-house.FeaturesBrand: NutricultureModel: Flexible TrayDimensions: 150×150×10 cmSide wall height: 10 cmDesign: FlexibleUse: Catch tray and base for gro
Nutriculture - Flexible Tray catch tray, 80x80x10 cm
The Nutriculture Flexible Tray has a 80×80 cm footprint and is a flexible catch tray for grow rooms and suitably sized grow tents. It can be moved through narrow openings where rigid trays are impractical.The 10 cm high side walls help keep water and dirt inside the tray. It can also be used as a base to keep work areas clean. Nutriculture manufactures it in-house.FeaturesBrand: NutricultureModel: Flexible TrayDimensions: 80×80×10 cmDesign: FlexibleUse: Catch tray and work surfaceManufacture: Manufactured i
New arrivals
Content: 1000 Mililiter (CHF 0.02 / 1 Mililiter)
Content: 1000 Mililiter (CHF 0.08 / 1 Mililiter)
Content: 1000 Mililiter (CHF 0.02 / 1 Mililiter)
Content: 1000 Mililiter (CHF 0.08 / 1 Mililiter)
Content: 1000 Mililiter (CHF 0.02 / 1 Mililiter)
Content: 1000 Mililiter (CHF 0.08 / 1 Mililiter)
Content: 10 Mililiter (CHF 2.20 / 1 Mililiter)