GSE - Temperature and Negative Pressure Controller, 2 A
CHF 169.00
Available, delivery time: 1-3 Werktage
Loading pickup options …
Pickup options could not be loaded.
Product information "GSE - Temperature and Negative Pressure Controller, 2 A"
The GSE temperature and negative pressure controller controls suitable intake and exhaust fans together. Speed adjusts to the temperature setpoint. Minimum speed and a reduced intake ratio can be set separately.
The negative pressure function reduces the drive to the intake fan relative to the exhaust fan. Actual negative pressure also depends on the fans, filters, air paths and openings in the room. The controller does not measure differential pressure in pascals. It can also be used with just an exhaust fan and passive intake.
Features
- Temperature setpoint: 20–30 °C
- Minimum speed: Off or 20–100%
- Intake ratio: 50–100% of the set control output
- Version: 2 A, for 2 × 200 W according to the unit specifications
- Mains voltage: 230 V, 50 Hz
- Temperature sensor: External, with 4 m cable
- Device dimensions (W × H × D): 160 × 100 × 90 mm
- IP rating: IP54
Connection and Operation
- Connect only fans approved for this type of speed control.
- Connect the exhaust and intake fans to their designated outputs.
- Set the minimum speed so the connected fans run safely. Check the airflow ratio once the system is set up.
Package Contents
1 × GSE temperature and negative pressure controller with temperature probe and 4 m sensor cable. Fans not included.
Login